 |
LArSoft
v06_85_00
Liquid Argon Software toolkit - http://larsoft.org/
|
|
LArSoft
v06_85_00
Liquid Argon Software toolkit - http://larsoft.org/
|
| Example name: | CatchException |
|---|---|
| Type: | Tutorial (with module) |
| Author: | Gianluca Petrillo (petrillo@fnal.gov) |
| Created on: | March 21, 2018 |
| Version: | 1.0 |
This is a tutorial on how to track down where an exception is thrown in the code.
After you have compiled the code in the usual way, read the introduction first and then just follow one of the tutorials. If you have a real use case, you may start with the first tutorial, and if it does not work go to the second, then the third, then the last. Or go directly to the last, which is more annoying but the safest.
Available tutorials:
For every questions, answered or not here, you are strongly encouraged to contact the example's author (contact information is at the top of this file).
And, if you want to have a bit more printer friendly format, know this text file is written in markdown format and you can convert it to something else with:
pandoc -s -S --toc -o README.html README.md pandoc -s -S --toc -o README.pdf README.md
et cetera.
In these tutorials we try to track down the location in the code where a fatal exception is thrown.
We'll use a debugger. The use of a debug version of larexamples will improve the debugging experience, but it's not required (in fact, for this tutorial I am using prof myself). We are going to run a job which eventually executes a module that is in fact designed to throw an exception for our own entertainment.
I'll use GDB, because it's almost everywhere. In one of the places where that is not, LLDB is available instead, and there are maps of GDB to LLDB commands all over the Internet (and LLDB kindly implements GDB-like aliases for many of the common commands). If you are working on a system with UPS, set up the most recent version you have available (check with ups list -aK+ gdb | sort); for example, at the time of writing:
setup gdb v8_0_1
In this tutorial we track the fatal exception out of exploder_badalloc.fcl. Let's start with running the job:
lar -c exploder_badalloc.fcl
which in my session ends like:
%MSG-s ArtException: PostEndJob 21-Mar-2018 20:42:58 CDT ModuleEndJob
cet::exception caught in art
---- OtherArt BEGIN
---- EventProcessorFailure BEGIN
EventProcessor: an exception occurred during current event processing
---- EventProcessorFailure BEGIN
EndPathExecutor: an exception occurred during current event processing
---- ScheduleExecutionFailure BEGIN
Path: ProcessingStopped.
---- BadAlloc BEGIN
A std::bad_alloc exception occurred during a call to the module larexamples/DebuggingExamples/CatchException/Exploder/exploder run: 1 subRun: 0 event: 1
The job has probably exhausted the virtual memory available to the process.
---- BadAlloc END
Exception going through path end_path
---- ScheduleExecutionFailure END
---- EventProcessorFailure END
---- EventProcessorFailure END
---- OtherArt END
%MSG
Art has completed and will exit with status 1.
So, art has completed with status 1, which means error (everything that is not 0 means error, after all). And it seems there is a memory allocation that was beyond the availability of the system. Let's fire up a debugger: let's use the same command line as before, but with GDB:
gdb --args lar -c exploder_badalloc.fcl
If we run (which I recommend), by issuing the run command, we'll get the same result as before. Not very helpful so far...
We can tell GDB to stop every time an exception is thrown. After all, exceptions are used only in case of... exceptional conditions, right?
catch throw run
Note that after the first command, GDB tells us something like Catchpoint 1 (throw). The 1 here is important: GDB identifies all the points we ask it to interrupt the program (breakpoints) with a unique number. We are dropped at a point like:
%MSG-i MF_INIT_OK: Early 21-Mar-2018 20:46:42 CDT JobSetup
Messagelogger initialization complete.
%MSG
Begin processing the 1st record. run: 1 subRun: 0 event: 1 at 21-Mar-2018 20:46:44 CDT
Now allocating: 17592186044415 x 1048576 bytes
Catchpoint 1 (exception thrown), __cxxabiv1::__cxa_throw (obj=0x7fffdc000940, tinfo=0x7ffff0aba770 <typeinfo for std::bad_alloc>, dest=0x7ffff07d5a60 <std::bad_alloc::~bad_alloc()>)
at ../../.././libstdc++-v3/libsupc++/eh_throw.cc:63
63 ../../.././libstdc++-v3/libsupc++/eh_throw.cc: No such file or directory.
GDB is telling us that something has thrown an exception from line 63 of source file ../../.././libstdc++-v3/libsupc++/eh_throw.cc. Huh?! Well, let's see where that comes from. Note that it's promising, since it also shows that we are in the destructor of std::bad_alloc, which sounds related to our error message.
If you are following this tutorial for a real debugging case and you find instead that this exception is not what you are looking for, check out the next tutorial.
Provided that this is indeed the exception we want, we ask an extract of the stack backtrace, that is the list of calls that led to the function throwing the exception. Since this list can be long, we start with limiting it to the 10 lowest entries:
backtrace 10
(short: bt 10)
#0 __cxxabiv1::__cxa_throw (obj=0x7fffdc000940, tinfo=0x7ffff0aba770 <typeinfo for std::bad_alloc>, dest=0x7ffff07d5a60 <std::bad_alloc::~bad_alloc()>)
at ../../.././libstdc++-v3/libsupc++/eh_throw.cc:63
#1 0x00007ffff07d7d5c in operator new (sz=sz@entry=18446744073708503040) at ../../.././libstdc++-v3/libsupc++/new_op.cc:54
#2 0x00007fffe12630b1 in __gnu_cxx::new_allocator<std::array<unsigned char, 1048576ul> >::allocate (this=<synthetic pointer>, __n=17592186044415)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/ext/new_allocator.h:104
#3 std::allocator_traits<std::allocator<std::array<unsigned char, 1048576ul> > >::allocate (__a=<synthetic pointer>..., __n=17592186044415)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/alloc_traits.h:436
#4 std::_Vector_base<std::array<unsigned char, 1048576ul>, std::allocator<std::array<unsigned char, 1048576ul> > >::_M_allocate (this=<synthetic pointer>, __n=17592186044415)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/stl_vector.h:170
#5 std::vector<std::array<unsigned char, 1048576ul>, std::allocator<std::array<unsigned char, 1048576ul> > >::_M_default_append (__n=17592186044415, this=<synthetic pointer>)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/vector.tcc:557
#6 std::vector<std::array<unsigned char, 1048576ul>, std::allocator<std::array<unsigned char, 1048576ul> > >::resize (__new_size=17592186044415, this=<synthetic pointer>)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/stl_vector.h:677
#7 lar::example::Exploder::throwBadAlloc () at /scratch/petrillo/LArSoft/software/build/develop/prof/srcs/larexamples/larexamples/DebuggingExamples/CatchException/Exploder_module.cc:181
#8 0x00007fffe1263165 in lar::example::Exploder::analyze (this=0x4f8a080)
at /scratch/petrillo/LArSoft/software/build/develop/prof/srcs/larexamples/larexamples/DebuggingExamples/CatchException/Exploder_module.cc:120
#9 0x00007ffff6a2ce7d in art::EDAnalyzer::doEvent (this=0x4f8a080, ep=..., cpc=..., counts=...)
at /scratch/workspace/art-release-build/SLF7/prof/build/art/v2_10_03/src/art/Framework/Core/EDAnalyzer.cc:29
Reading the lines one by one, something starts to make sense at the level #6, where std::vector::resize is mentioned: it's a tyep of vector we use in our code, and we wrote a resize() call after all. Even better, at level #7 we are informed that the function lar::example::Exploder::throwBadAlloc calls it at line 181. We can ask GDB to give us a snapshot of where that is:
frame 7 list
The first command already shows the incriminated line, and the second gives it 10 lines of context:
176 std::vector<OneMebibyte> manyMebibytes;
177
178 // this is allowed, but we don't have enough memory
179 mf::LogVerbatim("Exploder") << "Now allocating: " << manyMebibytes.max_size()
180 << " x " << sizeof(OneMebibyte) << " bytes";
181 manyMebibytes.resize(manyMebibytes.max_size());
182
183 } // lar::example::Exploder::throwBadAlloc()
184
185
What did we do?! If we go down the stack one level to frame #6 (down), we see
#6 std::vector<std::array<unsigned char, 1048576ul>, std::allocator<std::array<unsigned char, 1048576ul> > >::resize (__new_size=17592186044415, this=<synthetic pointer>)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/stl_vector.h:677
677 _M_default_append(__new_size - size());
that shows the first argument of the vector to be __new_size=17592186044415, which is... a lot. That should not come to a surprise, since the debugger had shown this information already in the backtrace listing above, and even our own output was declaring the attempt to allocate 17592186044415 1-MiB objects. Oh well. Problem tracked, anyway (exit the debugger with quit).
We can verify that the value of i is 2 (print i), but other operations might be less successful: for example, if I ask to print intData I get:
$2 = <optimized out>
Using the debug version (again, this is prof), this might be more successful, or not, depending on the choices the compiler did. Anyway, the purpose of this tutorial is to find where the exception was thrown, and we did: it's the third iteration (i = 2) of the loop in lar::example::Exploder::analyze.
The easiest way to find where an exception is thrown is to ask GDB
catch throw run
It will stop at the first exception thrown.
Let's now debug exploder_outofrange.fcl:
lar -c exploder_outofrange.fcl
This throws like:
%MSG-s ArtException: PostEndJob 21-Mar-2018 20:57:36 CDT ModuleEndJob
cet::exception caught in art
---- OtherArt BEGIN
---- EventProcessorFailure BEGIN
EventProcessor: an exception occurred during current event processing
---- EventProcessorFailure BEGIN
EndPathExecutor: an exception occurred during current event processing
---- ScheduleExecutionFailure BEGIN
Path: ProcessingStopped.
---- StdException BEGIN
A std::exception occurred during a call to the module larexamples/DebuggingExamples/CatchException/Exploder/exploder run: 1 subRun: 0 event: 1
and cannot be repropagated.
Previous information:
vector::_M_range_check: __n (which is 5) >= this->size() (which is 5)
---- StdException END
Exception going through path end_path
---- ScheduleExecutionFailure END
---- EventProcessorFailure END
---- EventProcessorFailure END
---- OtherArt END
%MSG
Art has completed and will exit with status 1.
The output tells us we are looking for a std::exception, and there is some blattering about range checks. Let's go to the debugger:
gdb --args lar -c exploder_outofrange.fcl
We run to confirm we can reproduce the error (we can), and then we catch the throws and rerun:
catch throw run
It turns out, this time we are looking for range checks, but we are dropped at:
Begin processing the 1st record. run: 1 subRun: 0 event: 1 at 21-Mar-2018 20:59:57 CDT
Now allocating: 17592186044415 x 1048576 bytes
Catchpoint 1 (exception thrown), __cxxabiv1::__cxa_throw (obj=0x7fffdc000940, tinfo=0x7ffff0aba770 <typeinfo for std::bad_alloc>, dest=0x7ffff07d5a60 <std::bad_alloc::~bad_alloc()>)
at ../../.././libstdc++-v3/libsupc++/eh_throw.cc:63
63 ../../.././libstdc++-v3/libsupc++/eh_throw.cc: No such file or directory.
It's about allocations... is it it? In fact, it is not: a backtrace will show we are in a place similar to the previous tutorial:
#0 __cxxabiv1::__cxa_throw (obj=0x7fffdc000940, tinfo=0x7ffff0aba770 <typeinfo for std::bad_alloc>, dest=0x7ffff07d5a60 <std::bad_alloc::~bad_alloc()>)
at ../../.././libstdc++-v3/libsupc++/eh_throw.cc:63
#1 0x00007ffff07d7d5c in operator new (sz=sz@entry=18446744073708503040) at ../../.././libstdc++-v3/libsupc++/new_op.cc:54
#2 0x00007fffe12630b1 in __gnu_cxx::new_allocator<std::array<unsigned char, 1048576ul> >::allocate (this=<synthetic pointer>, __n=17592186044415)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/ext/new_allocator.h:104
#3 std::allocator_traits<std::allocator<std::array<unsigned char, 1048576ul> > >::allocate (__a=<synthetic pointer>..., __n=17592186044415)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/alloc_traits.h:436
#4 std::_Vector_base<std::array<unsigned char, 1048576ul>, std::allocator<std::array<unsigned char, 1048576ul> > >::_M_allocate (this=<synthetic pointer>, __n=17592186044415)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/stl_vector.h:170
#5 std::vector<std::array<unsigned char, 1048576ul>, std::allocator<std::array<unsigned char, 1048576ul> > >::_M_default_append (__n=17592186044415, this=<synthetic pointer>)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/vector.tcc:557
#6 std::vector<std::array<unsigned char, 1048576ul>, std::allocator<std::array<unsigned char, 1048576ul> > >::resize (__new_size=17592186044415, this=<synthetic pointer>)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/stl_vector.h:677
#7 lar::example::Exploder::throwBadAlloc () at /scratch/petrillo/LArSoft/software/build/develop/prof/srcs/larexamples/larexamples/DebuggingExamples/CatchException/Exploder_module.cc:181
#8 0x00007fffe126313a in lar::example::Exploder::analyze (this=0x4f89890)
at /scratch/petrillo/LArSoft/software/build/develop/prof/srcs/larexamples/larexamples/DebuggingExamples/CatchException/Exploder_module.cc:115
#9 0x00007ffff6a2ce7d in art::EDAnalyzer::doEvent (this=0x4f89890, ep=..., cpc=..., counts=...)
at /scratch/workspace/art-release-build/SLF7/prof/build/art/v2_10_03/src/art/Framework/Core/EDAnalyzer.cc:29
but the error we get is different from the one in that tutorial. What is happening? This time, the program can actually manage the exception, but GDB does not know anything of that. A look at the level #8 will show that we are at:
110 //
111 // std::length_error
112 //
113 if (fManageBadAlloc) {
114 try {
115 throwBadAlloc();
116 }
117 catch (std::bad_alloc const&) {}
118 }
119 else {
which is in fact a different line of code than the one in the previous tutorial; we see that we are at line 115 (from the backtrace information), not at line 120 as before, and we also see that the next thing the program was going to do was to catch that exception and "manage" it. Ok... red herring number one, and also lesson number one: whichever exception is thrown, GDB will kindly stop for us to take action. We can try our luck and tell GDB to continue and see what happens:
Continuing.
Starting TOOR iteration #0
Starting TOOR iteration #1
Starting TOOR iteration #2
Starting TOOR iteration #3
Starting TOOR iteration #4
Starting TOOR iteration #5
Catchpoint 1 (exception thrown), __cxxabiv1::__cxa_throw (obj=obj@entry=0x7fffdc0010a0, tinfo=0x7ffff0abba98 <typeinfo for std::out_of_range>,
dest=0x7ffff07ecdb0 <std::out_of_range::~out_of_range()>) at ../../.././libstdc++-v3/libsupc++/eh_throw.cc:63
63 ../../.././libstdc++-v3/libsupc++/eh_throw.cc: No such file or directory.
This is output we had also in our run without the debugger, and then we are left at:
#0 __cxxabiv1::__cxa_throw (obj=obj@entry=0x7fffdc0010a0, tinfo=0x7ffff0abba98 <typeinfo for std::out_of_range>, dest=0x7ffff07ecdb0 <std::out_of_range::~out_of_range()>)
at ../../.././libstdc++-v3/libsupc++/eh_throw.cc:63
#1 0x00007ffff0800135 in std::__throw_out_of_range_fmt (__fmt=__fmt@entry=0x7fffe1271460 "vector::_M_range_check: __n (which is %zu) >= this->size() (which is %zu)")
at ../../../.././libstdc++-v3/src/c++11/functexcept.cc:104
#2 0x00007fffe1262e94 in std::vector<int, std::allocator<int> >::_M_range_check (__n=5, this=<synthetic pointer>)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/stl_vector.h:804
#3 std::vector<int, std::allocator<int> >::at (__n=5, this=<synthetic pointer>)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/stl_vector.h:825
#4 lar::example::Exploder::throwOutOfRange () at /scratch/petrillo/LArSoft/software/build/develop/prof/srcs/larexamples/larexamples/DebuggingExamples/CatchException/Exploder_module.cc:162
#5 0x00007fffe1263173 in lar::example::Exploder::analyze (this=0x4f89890)
at /scratch/petrillo/LArSoft/software/build/develop/prof/srcs/larexamples/larexamples/DebuggingExamples/CatchException/Exploder_module.cc:133
#6 0x00007ffff6a2ce7d in art::EDAnalyzer::doEvent (this=0x4f89890, ep=..., cpc=..., counts=...)
at /scratch/workspace/art-release-build/SLF7/prof/build/art/v2_10_03/src/art/Framework/Core/EDAnalyzer.cc:29
[...]
Again reading the backtrace, we see our code at #3 and it's executing the std::vector::at method, which is in fact known to perform range check and throw a std::out_of_range exception if that check fails. Focusing on the stack frame where at() is called (frame 4), we can list the code:
157 int intTotal = 0;
158 for (unsigned int i = 0; i < 10; ++i) {
159 mf::LogVerbatim("Exploder") << "Starting TOOR iteration #" << i;
160
161 // possible std::out_of_range throw
162 intTotal += intData.at(i);
163
164 } // for
165 mf::LogVerbatim("Exploder") << "TOOR iterations completed.";
166
What are we doing? we can ask the debugger to print i, which we are told has value 5. We can also ask to print the vector itself (print intData) or its size (print intData.size()), but the level of success may vary a lot. For example, in my optimised code (prof qualifier), the former gives me an unfriendly view of the vector (showing its three internal pointers) while the latter fails miserably with:
Can't take address of "intData" which isn't an lvalue.
If you know about std::vector, you can get the size with the expression: print intData._M_impl._M_finish - intData._M_impl._M_start (that is, number of elements between the pointers of the end and the begin of the data); in my case that also fails because intData._M_impl._M_finish is also "optimized out" (intData._M_impl._M_start is not... bah). Anyway, this is where we wanted to be, and where our bug is.
The easiest way to find where an exception is thrown is to ask GDB
catch throw run
It will stop at the first exception thrown. If that's not the one that hit you, then you can ask GDB to
continue
until you are dropped at the right one.
Let's now debug exploder_disturbed_outofrange.fcl:
lar -c exploder_disturbed_outofrange.fcl
This throws like:
%MSG-s ArtException: PostEndJob 22-Mar-2018 10:07:02 CDT ModuleEndJob
cet::exception caught in art
---- OtherArt BEGIN
---- EventProcessorFailure BEGIN
EventProcessor: an exception occurred during current event processing
---- EventProcessorFailure BEGIN
EndPathExecutor: an exception occurred during current event processing
---- ScheduleExecutionFailure BEGIN
Path: ProcessingStopped.
---- StdException BEGIN
A std::exception occurred during a call to the module larexamples/DebuggingExamples/CatchException/Exploder/exploder run: 1 subRun: 0 event: 1
and cannot be repropagated.
Previous information:
vector::_M_range_check: __n (which is 5) >= this->size() (which is 5)
---- StdException END
Exception going through path end_path
---- ScheduleExecutionFailure END
---- EventProcessorFailure END
---- EventProcessorFailure END
---- OtherArt END
%MSG
Art has completed and will exit with status 1.
We have seen this exception in a previous tutorial. If we follow that one:
catch throw run
we are dropped at:
89
90 //------------------------------------------------------------------------------
91 void lar::example::Disturbance::throwArtException() {
92
93 throw art::Exception(art::errors::LogicError)
94 << "I want to annoy you.\n";
95
96 } // lar::example::Disturbance::throwArtException()
97
(that is frame 2). That is not the exception we are looking for. If we hit continue, we are driven to... the same place, again and again. Then we get out of patience very quickly, and the next approach is due. This is in fact the realistic situation we encounter with some XML parsing library that LArSoft indirectly depends on. That next approach is to use a breakpoint on the call to all the constructors of the exception we are hunting: before being thrown, the exception object must be constructed! Here we fetch some additional knowledge: that exception is a C++ STL exception known as std::out_of_range. It can be recognised by the error message. So we set a new one on the constructors of std::out_of_range, and we also remove the first breakpoint that we set with catch throw earlier, to go beyond the stalling point:
break std::out_of_range::out_of_range delete 1
(1 is what GDB told us the first breakpoint number was, and now it tells us also that the new one is 2). In this case, since we have already loaded the program, GDB already knows of the class std::out_of_range and it tells us:
Breakpoint 2 at 0x7fffee44bc30 (11 locations)
meaning that there are many constructors for that class (you can see that with info breakpoints). If we hadn't loaded and run the program, it might happen that the debugger tells us it does not know about that symbol std::out_of_range::out_of_range, and asks us if we want it to keep an eye open and set the breakpoint as soon as that symbol is loaded. In general, that's what we want, but be warned that if we misspelled the function name (not at all unlikely), no break will happen and we will not be warned about that.
Since we are already in the middle of the debugging, we can continue after having rearranged our breakpoints as described above. Or we can run again from the beginning. We here choose:
Continuing. Now allocating: 17592186044415 x 1048576 bytes Starting TOOR iteration #0 Starting TOOR iteration #1 Starting TOOR iteration #2 Starting TOOR iteration #3 Starting TOOR iteration #4 Starting TOOR iteration #5 Breakpoint 2, 0x00007ffff07d3b80 in std::out_of_range::out_of_range(char const*)@plt () from /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/lib64/libstdc++.so.6
and we are left at the constructor as requested. The backtrace again shows a call to std::vector::at at frame #3:
#0 0x00007ffff07d3b80 in std::out_of_range::out_of_range(char const*)@plt () from /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/lib64/libstdc++.so.6
#1 0x00007ffff080011f in std::__throw_out_of_range_fmt (__fmt=__fmt@entry=0x7fffe1271460 "vector::_M_range_check: __n (which is %zu) >= this->size() (which is %zu)")
at ../../../.././libstdc++-v3/src/c++11/functexcept.cc:104
#2 0x00007fffe1262e94 in std::vector<int, std::allocator<int> >::_M_range_check (__n=5, this=<synthetic pointer>)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/stl_vector.h:804
#3 std::vector<int, std::allocator<int> >::at (__n=5, this=<synthetic pointer>)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/stl_vector.h:825
#4 lar::example::Exploder::throwOutOfRange ()
at /scratch/petrillo/LArSoft/software/build/develop/prof/srcs/larexamples/larexamples/DebuggingExamples/CatchException/Exploder_module.cc:162
ant it shows that it comes from a method in frame 4:
157 int intTotal = 0;
158 for (unsigned int i = 0; i < 10; ++i) {
159 mf::LogVerbatim("Exploder") << "Starting TOOR iteration #" << i;
160
161 // possible std::out_of_range throw
162 intTotal += intData.at(i);
163
164 } // for
165 mf::LogVerbatim("Exploder") << "TOOR iterations completed.";
166
Same point as in a previous tutorial, but this time it was harder to get there. And yet we did!
If the easiest way fails because a lot of exceptions are thrown before the one we seek, we can set a breakpoint on the constructor of the exception class, which we need to know or guess. For example, if the exception is std::out_of_range:
break std::out_of_range::out_of_range
The old throw catchpoint can be deleted as any other breakpoint, by knowing its index (e.g. delete 1).
Let's now debug exploder_disturbed_artexception.fcl:
lar -c exploder_disturbed_artexception.fcl
This throws like:
%MSG-s ArtException: PostEndJob 22-Mar-2018 10:29:38 CDT ModuleEndJob
cet::exception caught in art
---- OtherArt BEGIN
---- EventProcessorFailure BEGIN
EventProcessor: an exception occurred during current event processing
---- EventProcessorFailure BEGIN
EndPathExecutor: an exception occurred during current event processing
---- ScheduleExecutionFailure BEGIN
Path: ProcessingStopped.
---- LogicError BEGIN
I hate the world and I am vengeful.
cet::exception going through module larexamples/DebuggingExamples/CatchException/Exploder/exploder run: 1 subRun: 0 event: 1
---- LogicError END
Exception going through path end_path
---- ScheduleExecutionFailure END
---- EventProcessorFailure END
---- EventProcessorFailure END
---- OtherArt END
%MSG
Art has completed and will exit with status 1.
This exception is a cet::exception. Following the previous tutorials, we find ourselves in the situation where we keep being dropped at the wrong exception:
89
90 //------------------------------------------------------------------------------
91 void lar::example::Disturbance::throwArtException() {
92
93 throw art::Exception(art::errors::LogicError)
94 << "I want to annoy you.\n";
95
96 } // lar::example::Disturbance::throwArtException()
97
98
We know it's the wrong exception because the error message the code prints does not match the one we get on the screen when running. art tells us the exception we seek is of type cet::exception. It turns out it's actually a descendent of that, art::Exception, but we stick to what we know:
break cet::exception::exception delete 1
sets a whole load of breakpoints, and when we hit continue...
88
89
90 //------------------------------------------------------------------------------
91 void lar::example::Disturbance::throwArtException() {
92
93 throw art::Exception(art::errors::LogicError)
94 << "I want to annoy you.\n";
95
96 } // lar::example::Disturbance::throwArtException()
97
we are left here again. That ain't good. At this point we need to get more creative. The idea is to let the program run undisturbed until we enter the part of the program we believe the exception is being thrown in. The error message mentions larexamples/DebuggingExamples/CatchException/Exploder/exploder. This is in fact the module throwing the exception (usually, no path is specified and it would be just Exploder/exploder). The command lar --print-description Exploder will tell us the path to the source code and that the module is an analyzer. Then we can delete all the breakpoints (delete, then confirm) and set a single breakpoint where the action of the module starts: break lar::example::Exploder::analyze (we learn the namespace from the source code). Incidentally, GDB usually supports automatic completion by hitting the TAB key, but that may take very long time. If the library where Exploder module is hasn't been loaded yet, we'll be asked whether we want to make the breakpoint "pending", which we do want. We then run or continue, and we'll hit that breakpoint soon:
Breakpoint 5, lar::example::Exploder::analyze (this=0x4f922d0)
at /scratch/petrillo/LArSoft/software/build/develop/prof/srcs/larexamples/larexamples/DebuggingExamples/CatchException/Exploder_module.cc:108
108 void lar::example::Exploder::analyze(art::Event const&) {
Att his point we can start again with the old tricks: catch throw, or break cet::exception::exception, and then continue. For this tutorial, I did the former, and I landed to:
#0 __cxxabiv1::__cxa_throw (obj=0x7fffdc000940, tinfo=0x7ffff0aba770 <typeinfo for std::bad_alloc>, dest=0x7ffff07d5a60 <std::bad_alloc::~bad_alloc()>)
at ../../.././libstdc++-v3/libsupc++/eh_throw.cc:63
#1 0x00007ffff07d7d5c in operator new (sz=sz@entry=18446744073708503040) at ../../.././libstdc++-v3/libsupc++/new_op.cc:54
#2 0x00007fffe12630b1 in __gnu_cxx::new_allocator<std::array<unsigned char, 1048576ul> >::allocate (this=<synthetic pointer>, __n=17592186044415)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/ext/new_allocator.h:104
#3 std::allocator_traits<std::allocator<std::array<unsigned char, 1048576ul> > >::allocate (__a=<synthetic pointer>..., __n=17592186044415)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/alloc_traits.h:436
#4 std::_Vector_base<std::array<unsigned char, 1048576ul>, std::allocator<std::array<unsigned char, 1048576ul> > >::_M_allocate (this=<synthetic pointer>, __n=17592186044415)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/stl_vector.h:170
#5 std::vector<std::array<unsigned char, 1048576ul>, std::allocator<std::array<unsigned char, 1048576ul> > >::_M_default_append (__n=17592186044415, this=<synthetic pointer>)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/vector.tcc:557
#6 std::vector<std::array<unsigned char, 1048576ul>, std::allocator<std::array<unsigned char, 1048576ul> > >::resize (__new_size=17592186044415, this=<synthetic pointer>)
at /cvmfs/larsoft.opensciencegrid.org/products/gcc/v6_4_0/Linux64bit+3.10-2.17/include/c++/6.4.0/bits/stl_vector.h:677
#7 lar::example::Exploder::throwBadAlloc () at /scratch/petrillo/LArSoft/software/build/develop/prof/srcs/larexamples/larexamples/DebuggingExamples/CatchException/Exploder_module.cc:181
#8 0x00007fffe126313a in lar::example::Exploder::analyze (this=0x4f922d0)
at /scratch/petrillo/LArSoft/software/build/develop/prof/srcs/larexamples/larexamples/DebuggingExamples/CatchException/Exploder_module.cc:115
#9 0x00007ffff6a2ce7d in art::EDAnalyzer::doEvent (this=0x4f922d0, ep=..., cpc=..., counts=...)
at /scratch/workspace/art-release-build/SLF7/prof/build/art/v2_10_03/src/art/Framework/Core/EDAnalyzer.cc:29
that at frame 7 shows our code throwing the exception:
176 std::vector<OneMebibyte> manyMebibytes;
177
178 // this is allowed, but we don't have enough memory
179 mf::LogVerbatim("Exploder") << "Now allocating: " << manyMebibytes.max_size()
180 << " x " << sizeof(OneMebibyte) << " bytes";
181 manyMebibytes.resize(manyMebibytes.max_size());
182
183 } // lar::example::Exploder::throwBadAlloc()
184
This is a place we encountered already in a previous tutorial, and it is in fact not our target. It takes a couple more of continue to get to:
#0 __cxxabiv1::__cxa_throw (obj=obj@entry=0x7fffdc000960,
tinfo=0x7ffff7dd6768 <typeinfo for cet::coded_exception<art::errors::ErrorCodes, &art::ExceptionDetail::translate[abi:cxx11]>>,
tinfo@entry=0x7fffe1476e78 <typeinfo for cet::coded_exception<art::errors::ErrorCodes, &art::ExceptionDetail::translate[abi:cxx11]>>,
dest=0x7ffff7b426b0 <cet::coded_exception<art::errors::ErrorCodes, &art::ExceptionDetail::translate[abi:cxx11]>::~coded_exception()>,
dest@entry=0x7fffe1264d60 <cet::coded_exception<art::errors::ErrorCodes, &art::ExceptionDetail::translate[abi:cxx11]>::~coded_exception()>)
at ../../.././libstdc++-v3/libsupc++/eh_throw.cc:63
#1 0x00007fffe1262435 in lar::example::Exploder::throwArtException ()
at /scratch/petrillo/LArSoft/software/build/develop/prof/srcs/larexamples/larexamples/DebuggingExamples/CatchException/Exploder_module.cc:190
#2 0x00007ffff6a2ce7d in art::EDAnalyzer::doEvent (this=0x4f922d0, ep=..., cpc=..., counts=...)
at /scratch/workspace/art-release-build/SLF7/prof/build/art/v2_10_03/src/art/Framework/Core/EDAnalyzer.cc:29
which at frame 1 shows:
185
186 //------------------------------------------------------------------------------
187 void lar::example::Exploder::throwArtException() {
188
189 throw art::Exception(art::errors::LogicError)
190 << "I hate the world and I am vengeful.\n";
191
192 } // lar::example::Exploder::throwArtException()
193
This finally matches the error message. To have a confirmation: if executing continue again, we'll immediately get the failure that art shows.
Note: instead of deleting the breakpoint to cet::exception::exception, it can be disabled (disable 2) and then re-enabled when getting to the analyze method (enable 2).
If there are many exceptions of the same type being thrown and caught, and we are interested in the last one, which is of course not caught, we can run the program without breakpoints until it reaches the code we suspect, which may be the code of the module we are told in the error message. Information about the module can be obtained by lar --print-description ModuleClass, and the breakpoint can be set on its produce, filter or analyze (or beginJob, etc.) method with breakpoint ns::ModuleClass::produce etc.
If you have any question about the example, please contact its author. This section will be populated with questions and their answers.
Version 1.0: March 21, 2018 (petrillo@fnal.gov) original version
1.8.11